The power switch is the product of the master switch steel punching machine

punch press | precision press | Xie Duan Punch Factory – Dongguan Association of Punch production plant Punch button commonly used analytical instructions In this case Structural Steel Fabrication Equipment, 1, the power switch The power switch is the product of the master switch steel punching machine, when the power switch is turned on the red indicator light. Then the red will gradually turn into green, then we should be operating operations. In this case, 2, run / bit more than bit operation bit for the stamping operation sheet metal punch, and the key to this bit when the green light will be on; This key in the use of punching process which is also used more In this case, 3, co-ordinate punch indicator When we turn on the power when the red light is lit, that power has been turned on, can be normal operations; when we appear when the green power indicator light, that mechanical normal, Already in the Job state.


This time we can carry out the normal operation of the operation. In this case, 4, stamping operations There are two operating keys, the operation must be both hands at the same time pressing, the machinery will be stamping operations. In this case, 5, the motor switch This switch will open after the motor in operation, so that we can continue behind the action, open the red light will be on. So the novice in operation, please remember to let the equipment operation, do not forget the motor switch control Oh.

You can leave a response, or trackback from your own site.

Leave a Reply

Sorry, no posts matched your criteria.